Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$20.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$26.00 - $31.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$38.00
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
$23.99
- Melt forged aluminum construction - Coiled spring tension adjust
$9.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction
$11.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
$19.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: IS52/40/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide • Material: N/A • Weight: 35.35g
$24.99
The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. - Accepts any standard preload bolt and top cap (sold separately) - Insertion length: 46mm - Contact surface length: 38mm
$35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$90.00 - $110.00
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets
$125.99
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
$199.99
The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs
$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs
$22.00
Chris King Threadfit Bottom Bracket Conversions to mate your King ThreadFit BB to your chosen frame and crank spindle.
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring
$4.10
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing
$19.99
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing
Page 1 of 14 Next page